Welcome to our websites!

About Us


Since 2006, HZBOCON has been focus on only Ethylene Oxide(EO/ETO) sterilizers’ designing  developing and manufacturing. HZBOCON also provides ETO sterilizer related equipments:  precondition room/chamber , conveyor , aeration room/chamber and EO scrubber.


HZBOCONTurn-key Sterilization Station Project

HZBOCON involved in customer’s sterilization station layout design, precondition room, sterilizer , aeration room , scrubber’s manufacturing and installation , and testing .


HZBOCONSterilizer Chamber : Volume range : 1m3 ~ 100m3

Hot water heating system: it’s the most common and the traditional chamber jacket heating system. Even now it’s still be widely used. Normally the water jacket material is to use stainless steel. Even some buyers can accept carbon steel which the life is about 15 ~20years.

Hot wind system

It’s developed by our technical manager in 2013. It’s safer and saving energy cost. The even the jacket material is carbon steel, the sterilizer life is the same as stainless steel 30years.


Door configurations

HZBOCON provides three type of doors : pneumatic sliding door , pneumatic revolving door , and lifting door.

The advantages and disadvantages of Pneumatic Sliding Door

* Pneumatic sliding door uses the inflatable seal. The seal way is more convenient and reliable.
*The biggest drawback is taking up a certain level of space, it’s not suitable for the space-constrained occasions;
* Pneumatic sliding door is the most commonly used door control mode at home and abroad;
*The biggest drawback is taking up a certain level of space, it’s not suitable for the space-constrained occasions;


The advantages and disadvantages of pneumatic revolving door

* Pneumatic revolving door is actually the door with semi-inflatable seal, it’s a popular way at home and abroad. A cylinder is used to top up the door 100-200mm higher, so the door separates from the door groove, then it can be open and close manually. It’s suitable for large volume equipment.
* Pneumatic revolving door is simple in structure, it’s safe and reliable. It’s suitable for space limited on left and right or top and bottom.
* Pneumatic revolving door’s sealing way is inflatable seal. It’s easy convenient and reliable.
* The disadvantage is need human being help to open and close the door

The advantages and disadvantages of overall lifting door.

The overall lifting door is explosion-proof electric lifting door. It’s rising the overall door to the top or lowing it to the bottom. It’s the most space-saving way. It’s full automatic way, does not need any help to open or close.
*Overall lifting door is also used inflatable sealing method. It’s safe and reliable;
*The overall lifting door is suitable for any cabinet volume;
*The disadvantage is the cost is high because many security measures have to be added.